Cold Printing Build Plate

Description

Cold-pressed epoxy resin coating forms a micro-textured surface for exceptional adhesion, gripping PLA and TPU firmly without heating. Engineered for durability, it resist wear, scratches, and warping, ensuring reliable performance over hundreds of printing.

Energy-Saving Cool Printing – printing PLA affortlessly at a low temperature range of only 30-50°C, and PETG at only 50-70°C. With the breakthrough cold printing technology of the cold build plate, you can save 50W/h of power compared to traditional PEI build plate in printing that needs bed heating. Half energy can be saved!
Superior Adhesion & Warp Resistance – the cold-pressed epoxy resin coating forms a micro surface for exceptional adhesion to grip PLA firmly without heating. It highly surpasses traditional PEI steel spring sheets as per prints adsorption in cool printing with PLA and PETG. Its superior first-layer adhesion helps you to keep away from glue, edge warping and print falling off.
Easy to remove without Cooling – no need to wait, bend to release the models, greatly optimizing the printing process.
Ultra Dense Resin Coating – Engineered for durability, it resists wear, scratch and warping, ensuring reliable performance over hundreds of prints.

Note:

Recommended: PLA 30-50°C, PETG: 50-70°C, ABS: 90-100°C. The optimal print temperature for other consumables requires independent testing. Please note that the cold plate must not be used at temperatures exceeding 110°C.
Only use water and soap to clean the cold plate surfaces. Do not use solvents like alcohol since they may damage the adhesion of the surfaces.
Slight shadowing after removing prints is normal with cold plates. To ensure strong model adhesion even at low temperatures, the surface coating of cold plates is specifically designed to be pliable and have a degree of tackiness. As a result, the surface is relatively soft, which can lead to temporary imprinting. However, these imprints will fade over time.